Wednesday, November 25, 2015

Android update problem? Here's a quick solution

Recently, when I went to update my Verizon-branded Samsung Galaxy S4 or any samsung phone, I received a message that said, "Software update is temporarily unavailable"
There are no apps or settings you can install or configure that will solve this issue. The only way to correct it is by replacing your phone's SIM card. Period. So, before you waste any more time trying to get your phone updated, call your provider and tell them you need a replacement SIM card. If they ask, tell them why. If they instruct you to reset the phone to factory defaults, inform them that solution will not work. If they don't seem to follow your logic, take the device to the provider and show them.
Once you have your new SIM card, you'll need to replace it with the one currently in your device. If you've never replaced a SIM card, it's simple. Every device will vary, but the basics are the same:
  1. Remove the back of the phone
  2. Remove the battery
  3. Press the edge of the SIM card inward to release the locking mechanism
  4. Pull the SIM card out
  5. Insert the new SIM card until it clicks in the slot
  6. Replace the battery
  7. Replace the cover
  8. Start the device
  9. Replacing the SIM on a Samsung Galaxy S4.
    Once you have the SIM replaced, check again for an update. This time around, the process should continue, and the update be available for installation.
    I've heard that a large number of people are told (by nearly every provider) that the resolution for the update issue is a factory restore. However, that's simply not the case. The only way to resolve this issue is with a new SIM card. With that new SIM in place, the upgrade should go off without a hitch.
    Do you have any tips for upgrading Android software? Share your experience in the discussion thread below.

World Wind Android


Though others have generously contributed their Android virtual globe based on World Wind, currently for the NASA release, we merely have something that displays the globe with elevations, retrieves and caches imagery and elevations from the WW WMS servers, and allows you to manipulate the globe via a multi-touch interface. We’ve taken some liberties with the WW API in order to simply get started and to find optimal performance. Once we get farther along we’ll know better how much we’ll have to deviate from current interfaces. Our hope is, not much.